Sunday, August 8, 2010

Difference Between In Grown Hair And Herpes

Getting Started Basic settings

On this page:
  • Top day
  • Internal parameters of GPS
  • Set on a schedule (never used this function ...)

Top day
Fully charged (plugged into the USB port of the PC or a charger for up to 1.5 to 2.h) and pre-set with my settings apart, I start the GPS just before leaving in the morning (5 minutes) by pressing the button approx. 5s until the blue LED lights, preferably outside or near the window to find the satellites without too much difficulty. It seems to me that staying on site, time is shorter for the GPS satellites is that if you move.

While the GPS research satellites, the blue LED continues to blink regularly, for 30 seconds to 2 minutes easily depending on the configuration of the site.

Every day, drain the most recent data but ince August 2009, there is the option to make an circular logging, since I never erased the data.
circular logging, this means if the GPS memory is full, the new coordinates replace the oldest of the old file so that the GPS does not cease to register the new address even if the memory is full Thus, you lose only the coordinates the oldest. They will be sunk if you do not have them transferred to your PC!

Before I move, I make sure that the satellites are found, the red and blue flashing simultaneously twice quickly, then the blue LED indicator flashes irregularly once (depending on the chosen frequency) to new both blink twice quickly. All is well, the GPS records! (the frequency of the LED varies depending on the settings pre-configured. It is when the red light flashes twice briefly as recording contact is made) In normal use, the blue LED flashes at the same time as the red led only once, without red LED, depending on the chosen frequency of the time in seconds.

Settings internal GPS
These parameters can not be changed without being connected to a computer.


There are 7 icons that can be chosen depending on the mode of transport. These icons are used to pre-select the various parameters of interval recording time.

The to be forwarded to IgotU is one who is chosen with the parameters "apparent ", not the other. If you want to change the time interval, you must reconnect the IgotU and change the settings, it is not possible to do otherwise.

For my part, I use one, the first, feet, set at 3s. For cons, I check the automatic mode and selects an interval of 2 seconds when I exceed 15 km / h. This means that the IgotU automatically switches in these two modes, less than 15km / h over 15km / h when the GPS is autonomous, no longer connected to the PC.

It is possible to set the minimum interval of 1 second. (1Hz, it can not be set at a frequency of 5Hz!) The program informs me that at this rate, I'll have a life of about 10h, informative value for the duration of battery life (it really depends on the ease to receive the signal with your GPS, open sky, between buildings, hidden in a bag ...)

The memory of this device allows store 64,000 points, I just over 15,000 points in one day with my settings.

I expect whatever the operating conditions during this period to a maximum of 8hrs battery life. Thus, I avoid any surprises because we do not often watch the LEDs once engaged, or if we do, it's too late to notice that only the red LED blinks, information that the battery is empty.

The frustration of not having the end of a journey is too unpleasant. @ With TRIP, it is not possible to add the missing points manually! It is possible to do with other programs, pay, format. Gpx.
With these settings, I have a sufficiently precise route for the use I make, make my journey with geotagged photos.

Set on a schedule
I never used the logging function nor the function of switching on and off depending on the hour, I'd rather have complete control at any time and keep the device in "manual" mode by pressing the button.
It is possible to make the button "off" mode recording programmed, but in this case within a specific need, it does you will not be possible to modify them without being connected to a PC. (And this need there will be inevitable sooner or else ...: o)

  1. - My tricks
  2. - Mac Users
  3. - All the files of coordinates
  4. - All the parameters, settings
  5. - Cosmetics a path
  6. - Accuracy of GPS IgotU
  7. - Getting Started, Settings Basic
  8. - Battery and memory
  9. - Transfer, export, manage data, coordinates
  10. - No internet connection
  11. - Time Management
  12. - photos, import, rename, replace
  13. - The runners
  14. - Backup , export a route

0 comments:

Post a Comment