On this page:
- Create a file type of movement
- A file by mode
- Split a file
- Use multiple trips and group
- Location of files on the computer
- Rename files
- Select Folder Course
- Assemble multiple trips
- How to find a coordinate on the map data
- Overview capacity remaining modules GPS NEW
Create a file type of movement
6) When you walk in hand, there are several means of transport such as car journeys to reach the site and then walk on hiking trails. To do this, we put the "good" runner (runner) for every situation! At the program's GPS, it automatically controls the speed difference previously programmed by cons have to share a file for several different types of travel is long and tedious when it comes to finding the right point coordinate .
To simplify the task based on the average transport used, turn off the GPS and then turn it back on immediately that you create a new file. Unlike the first start, he almost immediately found the signal, so no waste of time, just thinking about it every time!
A file by mode
At each change of means of travel, I disconnect GPS to create a new file. I think to do quite easily in the car, I put the GPS on the dash edge against the window for optimal reception. When I leave the car, I place the GPS on the camera strap that I wear on my shoulder. Each file contains a full name with date and time of the beginning of the runway, in addition to the new name if you changed it during the data transfer.
Split a file
7) If you split a file to be able to assign riders "runners" in @ Trip, select the file, right click "attributes" set the value of the track to "zero" in this way, all waypoints are used (with the green check mark in front and not only the most relevant selected by Trip @ like the example below)
If we do not define the value to zero for the new file, the first and last coordinated "way-points" not checked will be removed , and will not appear on the map, causing a hole in the plot.
Therefore, for each mode, I created a new file. When transferring files from the GPS, all new files will be automatically checked. Once transferred into @ Trip, they will be in one folder on the course name (if changed previously) Once all the different types of paths created by these new files, we can more easily apply a "runner" specific route. It's even easier once the photos are imported into @ Trip
Use multiple trips and group
On a trip of several days, it is possible together every day for display on a single card in a folder. Example of my trip to Iceland on 28d In @ Trip computer, currently 4th top button from the left, "New Trip" opens a window with all the routes stored on your PC, the is "gross" with those you have already used.
Select all tracks by holding down the CTRL key for the course are highlighted.
Next, name the new folder, Next, check the time zone (should be the same for simplicity) the new route with multiple paths is created, and each course has Having assigned a different color, as simple as that! You can also later change the couleur.Maintenant, you manage each file as if it were a single term or a split course, the all displayed on one map, it's easy.
Note, again, any changes you make in this new folder will not change the data import raw files. It's like if you copy and paste the file, not affecting the original.
To add photos, remember to select the correct file (corresponding to a color) on import, so it can be integrated in the right time.
Location of files on the computer
Question Frits de Laar
I had a crash on my PC running Windows XP. I could save more data.
After I installed Windows 7 and have also installed the software + drivers for @ Trip and recorded the data.
My question is:
What data folder trips are recorded and what file extensions are used?
Each trip is recorded it separately?
Response Esteban y Silvia Posted: Mon October 19 2009 Posted: Mon October 19 2009
After I installed Windows 7 and have also installed the software + drivers for @ Trip and recorded the data.
My question is:
What data folder trips are recorded and what file extensions are used?
Each trip is recorded it separately?
Response Esteban y Silvia Posted: Mon October 19 2009 Posted: Mon October 19 2009
| ||
Rename files
Leave the file name suggested, or create a new folder name, what I love doing. Choose the type of card presentation. (the selection can be changed later)
Once the data transfer is complete, a dialog box opens with all the files previously imported, dated and named if the file has been changed (if old files on the GPS is still present, @ Trip recognizes and passes quickly to load only new files, they will not be charged.
Select Folder Course
files checked in green are generally imported the new files, check the date. Otherwise, right-click to uncheck those you do not want (it is also possible to delete files that are not useful later in @ Trip composer)
Sometimes first file has the file date of yesterday, is a bug. In this problem, only the first point coordinate is giving the wrong date and time of file, all others are correct. select it anyway if the first hour and a half will be absent (debugged since July 2009!)
Assemble multiple trips
six months later, I also selected all the courses, put them Butt, separate paths with different colors, chosen as approx. 250 photos and did another full term in one piece. The result is astonishing! It is better to have time and patience to do it ... New
How to find a coordinate on the map data
There are several methods more or less tedious with the @ Trip. First, uncheck the attributes that all details are checked green. Do not import Otherwise the photos before the refresh course take much longer.
first option. Place the course in sport mode and move the runner, the information such as time evolves according to the location of the runner, track time and found in the data, delete it. It may take considerable time in function of path length and number of misplaced items.
2nd option. On the map, in @ Trip dial, move the cursor to the coordinate undesirable, right click, insert an image.
The round red points that is to be removed, typically, I was in the souvenir shop
Right click on the location of the unwanted spot, add a photo
Select any photo, ideally a photo very light (to avoid slowing down the system) that only go to the next step shown above. Select "Bookmark", click OK
Appears marking on the card but it did not fall directly on the plot, it lacks time information in the mark. Hold the pointer over it, left click held down, move to the cross the mark is found on the line, let go.
Here it is correctly placed, time has added to the mark, at the same time, the runner was placed on it. It is because of the time we will find the line of coordinated data.
Search data the left window of the landmark site, matching the time within seconds. Delete the corresponding line.
It may be that several points are badly placed, click on surrounding lines to see or will move the "pin" to select other details reactions.
The marker does not match anything, the line linked so went directly between the two coordinates before and after this / these lines deleted ... If a photo was between the coordinates deleted, it will automatically return to the nearest similar coordinates. There is a function in which @ Trip to redefine all photos by selecting the first so that they fall into place at best. The 4th button from the left @ Trip compose Locate the photos (photo locator) Generally, it is not necessary to change the time by taking the first picture because in my case, it is generally well positioned, just continue process "next"
With the same marker, slip on the course for eliminate undesirable coordinated next, and so on.
The specific course "cleaned several coordinated events, where points far jump between two points" problem "all the basic GPS such, all manufacturers .
Overview capacity remaining modules GPS
Following a question on the forum @ Trip, here in images the moment you can see the capacity of coordinate points recorded on your GPS module, available with all versions of @ Trip computer, the latest version of June 2010.
Transferring a large number of files (35) because on this PC, I had not plugged the GPS.
For information, I had fun creating a course with these 35 files made over several months, Trip @ PC perfectly able to manage all those details in a very short time, without photos.
- - My tricks
- -
- Mac Users - All About coordinate files
- - All on the parameters, settings
- - Cosmetics a path
- - Accuracy of GPS IgotU
- - Getting Started Basic settings
- - battery and internal memory
- - Transfer, export, manage data, coordinates
- - No internet connection
- - Time Management
- - photos, import, rename, replace
- - The runners
- - Backup, export a route
0 comments:
Post a Comment